TEA 1-0505HI

DC/DC Converter TEA 1HI Series, 1 Watt • • • Highly cost efficient design • • • • • 5 VDC (±10%) input voltage range I/O isolation: 4’000 VDC Operating temperature range -40 to +85 °C without derating Unregulated outputs Efficiency up to 78% Industry standard SIP-7 package 3-year product warranty The TEA 1HI is an unregulated 1 Watt DC/DC SIP-7 converter series with high isolation which is specifically designed to offer a low-cost solution while keeping a high quality standard. This new series focuses on a simple but effective design approach, which minimizes component and labor cost and is complemented with a complete automatization of the manufacturing process. An operating temperature range from -40°C to 85°C without derating and an I/O-isolation of 4’000 VDC enables this series to cover many different applications. The industry standard package of this converter offers a broad application range in any space, cost critical application and is especially suited for high volume projects where simple but reliable products are needed. Models Order Code TEA 1-0505HI www.tracopower.com Input Voltage Output Voltage Output Current Efficiency Range nom. max. typ. 4.5 - 5.5 VDC (5 VDC nom.) 5 VDC 200 mA 78 % November 30, 2022 Page 1 / 3 TEA 1HI Series, 1 Watt Input Specifications Input Current - At no load Surge Voltage Recommended Input Fuse 28 mA typ. 9 VDC max. (1 s max.) 500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Input Filter Output Specifications Voltage Set Accuracy Regulation Ripple and Noise ±3% max. (at 60 % load) 1.5% max. 9% max. 50 mVp-p typ. 100 mVp-p max. 1'000 µF max. Not required ±0.03 %/K max. 30 ms max. Limited 1 s max., Automatic recovery - Input Variation (1% Vin step) - Load Variation (10 - 90%) - 20 MHz Bandwidth Capacitive Load Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Safety Specifications Safety Standards Designed for EN 62368-1 (no certification) - IT / Multimedia Equipment General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF 95% max. (non condensing) –40°C to +95°C +105°C max. –55°C to +125°C 5 %/K above 85°C See application note: www.tracopower.com/overview/tea1hi Natural convection (20 LFM) 100 kHz typ. (Royer) Functional Insulation 4'000 VDC 1'000 MΩ min. 30 pF typ. 2'000'000 h (MIL-HDBK-217F, ground benign) Not allowed Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Phosphor Bronze (C5191) Nickel (1 µm min.) Tin (3 µm min.), bright Plastic Case PCB Mount THD (Through-Hole Device) SIP7 Wave Soldering 265 °C / 5 s max. 2g All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 3 TEA 1HI Series, 1 Watt Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tea1hi Outline Dimensions 19.50 Pinout (0.37) Front view 5 7 4.10 2 (0.02) 0.50 1 2.40 2.54 7.62 5.08 (0.09) (0.30) (0.20) (0.10) Pin Function 1 +Vin (Vcc) 2 –Vin (GND) 5 –Vout 7 +Vout (0.16) 9.50 (0.76) 0.50 0.50 × 0.25 (0.02 × 0.01) (0.24) Bottom view 6.00 0.90 (0.035) (0.02) Dimensions in mm (inch) Tolerances: x.xx ±0.35 (±0.01) © Copyright 2022 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 3 / 3